C5B Digital Spa Controls.

C5B Digital Spa Controls - Standard Specifications:

- Self-Standing Control
- T5 Digital Topside
- 2 Speed 1st Pump Ready / Cord
- 1 Speed 2nd Pump Ready
- Circ. Pump Ready
- Blower Ready
- 12v Spa Light Ready / Cord
- Ozone Ready
- Flo-Thru Stainless Steel Heater


Dimensions:
- 11" Tall
- 19" Wide
- 3.25" Deep

These spa controls ship standard with 240v transformers. 120 volt option available.


NOTE: These spa controls come standard with the cords for the light and a two speed primary pump, if additional AMP cords are needed please email us before you place your order and we will help you configure your package.

Top of Page

C5T Digital Spa Controls.

C5T Digital Spa Controls - Standard Specifications:

- Self-Standing Control
- T5 Digital Topside
- 2 Speed 1st Pump Ready / Cord
- 1 Speed 2nd Pump Ready
- Circ. Pump Ready
- Blower Ready
- 12v Spa Light Ready / Cord
- Ozone Ready
- Flo-Thru Stainless Steel Heater


Dimensions:
- 13" Tall
- 19" Wide
- 6" Deep

These spa controls ship standard with 240v transformers. 120 volt option available.


NOTE: These spa controls come standard with the cords for the light and a two speed primary pump, if additional AMP cords are needed please email us before you place your order and we will help you configure your package.

Top of Page

C5R Digital Spa Controls.

C5R Digital Spa Controls - Standard Specifications:

- Self-Standing Control
- T5 Digital Topside
- 2 Speed 1st Pump Ready / Cord
- 1 Speed 2nd Pump Ready
- Circ. Pump Ready
- Blower Ready
- 12v Spa Light Ready / Cord
- Ozone Ready
- Flo-Thru Stainless Steel Heater


Dimensions:
- 11" Tall
- 14.5" Wide
- 3" Deep

These spa controls ship standard with 240v transformers. 120 volt option available.


NOTE: These spa controls come standard with the cords for the light and a two speed primary pump, if additional AMP cords are needed please email us before you place your order and we will help you configure your package.

Top of Page

T5 Upper Controls.

T5 Topside Dimensions:
5" x 2.5"
The included T5 Topside requires only a 1.75" hole saw to install!

Top of Page

T5 Extension Plate
Don't forget to take a look at the optional Topside Extension Plate if you are replacing a larger topside than the T5.

FP129 Extension Plate

TOPSIDE (WITH EXTENSION) INSTALLATION GUIDE
When you are ready to install your topside control, if you don't already have a knock-out that's at least 1.75" in diameter, you can use a 1.75" (1 3/4") hole saw bit to make the hole needed. Simply drill the hole in the center of where you'll be installing the topside. Once ready, snake the cable from the control up through the topside cutout and plug it into the topside. Make sure the surface you will be mounting to is clean and dry before proceeding! If you are replacing an existing topside (or a number of air buttons) and the knock-out is bigger then your new United Spas topside, simply affix the topside to the optional extension plate by peeling off the paper over the adhesive on the back of the topside and placing the topside centered through the hole of the plate, slowly pressing firmly around the perimeter once centered and placed to insure a firmseal before proceeding to the next step. Now, simply center the topside (or extension plate with topside attached) over the existing cutout, remove the paper over the adhesive on the back of the topside/extension plate and press into place, slowly pressing all around the perimeter of the plate firmly for a few seconds each area, to assure a firm bond. Allow 2-4 hours for adhesive to thoroughly bond before use.

Top of Page

TW107 (dry sensor well/housing)

And our 1/4" Thermowell/Bushing, if the spa you are installing the control into doesn't already have one installed.
Installation instructions.

EL103 Upper Control Cable 30 foot.
Need a cable for the Upper control longer than the 8' cable provided?

Top of Page